Characterization, design, and optimization of a two-pass twisted nematic liquid crystal spatial light modulator system for arbitrary complex modulation

Arbitrary two-dimensional complex modulation of an optical field is a powerful tool for coherent optical systems. No single spatial light modulator (SLM) offers true arbitrary complex modulation, but they can be combined in order to achieve this. In this work, two sides of a twisted nematic (TN) liquid crystal SLM are used sequentially to implement different arbitrary modulation schemes. In order to fully explore and exploit the rich modulation behavior offered by a TN device, a generalized Jones matrix approach is used. A method for $\textit{in situ}$ characterization of the SLM inside the two-pass system is demonstrated, where each side of the SLM is independently characterized. This characterization data is then used to design appropriate polarizer configurations to implement arbitrary complex modulation schemes (albeit without 100% efficiency). Finally, an $\textit{in situ}$ optimization technique that corrects states by applying a translation in the complex plane is demonstrated. This technique can correct both for variations across the SLM and bulk changes in the SLM behavior due to the changing temperature.Engineering and Physical Sciences Research Council (EPSRC) (EP/G037256/1)

Relative limitations of increasing the number of modulation levels in computer generated holography

Phase and amplitude spatial light modulators (SLMs) capable of both binary and multi-level modulation are widely available and offer a wide range of technologies to choose from for holographic applications. While the replay fields generated with multi-level phase-only SLMs are of a significantly higher quality than those generated by equivalent binary phase-only SLMs, evidence is presented in this letter that this improvement is not as marked for amplitude SLMs, where multi-level devices offer only a small benefit over their binary counterparts. Heuristic and numerical justifications for this are discussed and conclusions drawn

Polarization-independent phase modulation using a blue-phase liquid crystal over silicon device.

Liquid crystal over silicon (LCoS) spatial light modulator technology has become dominant in industries such as pico-projection, which require high-quality reflective microdisplays for intensity modulation of light. They are, however, restricted from being used in wider optical applications, such as computer-generated holography, adaptive optics, and optical correlation, due to their phase modulation ability. The main drawback of these devices is that their modulation is based on simple planar or twisted nematic liquid crystals, which are inherently slow mechanisms due to their viscoelastic properties. Their use is also limited due to fact that the phase modulation is dependent on the state of polarization of the illumination. In this paper, we demonstrate that a polymer-stabilized blue-phase liquid crystal can offer both phase modulation and high speed switching in a silicon backplane device which is independent of the input polarization state. The LCoS device shows continuous phase modulation of light with a submillisecond switching time and insensitivity to the input light polarization direction. This type of phase modulation opens up a whole new class of applications for LCoS technology.RMH would like to acknowledge the financial support of the Dr. Richard Norman Scholarship fund. AL would like to acknowledge support from the German Research Foundation, (grant 1922/1-1). We would also like to acknowledge Dr. F. Castles for his help in identifying and stabilizing the blue phase.This is the accepted manuscript for a paper published in Applied Optics, Vol. 53, Issue 29, pp. 6925-6929 (2014) DOI: 10.1364/AO.53.00692

Single-step fabrication of thin-film linear variable bandpass filters based on metal-insulator-metal geometry

A single-step fabrication method is presented for ultra-thin, linearly variable optical bandpass filters (LVBFs) based on a metal–insulator–metal arrangement using modified evaporation deposition techniques. This alternate process methodology offers reduced complexity and cost in comparison to conventional techniques for fabricating LVBFs. We are able to achieve linear variation of insulator thickness across a sample, by adjusting the geometrical parameters of a typical physical vapor deposition process. We demonstrate LVBFs with spectral selectivity from 400 to 850 nm based on Ag (25 nm) and MgF$_{2}$ (75–250 nm). Maximum spectral transmittance is measured at ∼70% with a $\textit{Q}$-factor of ∼20.Engineering and Physical Sciences Research Council (EPSRC) (EP/L015455/1); Cambridge Commonwealth, European and International Trust

Holographic Predictive Search: Extending the scope

Holographic Predictive Search (HPS) is a novel approach to search-based hologram generation that uses a mathematical understanding of the optical transforms to make informed optimisation decisions. Existing search techniques such as Direct Search (DS) and Simulated Annealing (SA) rely on trialling modifications to a test hologram and observing the results. A formula is used to decide whether the change should be accepted. HPS operates presciently, using knowledge of the underlying mathematical relationship to make exact changes to the test hologram that guarantee the'best’ outcome for that change. In this work, we extend the scope of the original research to cover both phase and amplitude modulating Spatial Light Modulators (SLMs), both phase sensitive and phase insensitive systems and both Fresnel and Fraunhofer diffraction. In the cases discussed, improvements of up to 10x are observed in final error and the approach also offers significant performance benefits in generation time. This comes at the expense of increased complexity and loss of generality

Single-Step Fabrication of Multispectral Filter Arrays Using Grayscale Lithography and Metal-Insulator-Metal Geometry

© 2018 OSA. Metal-insulator-metal geometries can provide optical transmission filtering, with peak wavelength dependent on insulator thickness. Using grayscale electron beam lithography to control insulator thickness, we fabricate multispectral filter arrays, whereby dose determines wavelength

Coherent Imaging through Multicore Fibres with Applications in Endoscopy

Imaging through optical fibres has recently emerged as a promising method of micro-scale optical imaging within a hair-thin form factor. This has significant applications in endoscopy and may enable minimally invasive imaging deep within live tissue for improved diagnosis of disease. Multi-mode fibres (MMF) are the most common choice because of their high resolution but multicore fibres (MCF) offer a number of advantages such as widespread clinical use, ability to form approximate images without correction and an inherently sparse transmission matrix (TM) enabling simple and fast characterisation. We present a novel experimental investigation into properties of MCF important for imaging, specifically: a new method to upsample and downsample measured TMs with minimal information loss, the first experimental measurement of MCF spatial eigenmodes, a novel statistical treatment of behaviour under bending based on a wireless fading model, and an experimental observation of TM drift due to self-heating effects and discussion of how to compensate this. We next present practical techniques for imaging through MCFs, including alignment, how to parallelise TM characterisation measurements to improve speed and how to use non-interferometric phase and polarisation recovery for improved stability. Finally, we present two recent applications of MCF imaging: polarimetric imaging using a robust Bayesian inference approach, and entropic imaging for imaging early-stage tumours

Cost-optimized heterogeneous FPGA architecture for non-iterative hologram generation.

The generation of computer-generated holograms (CGHs) requires a significant amount of computational power. To accelerate the process, highly parallel field-programmable gate arrays (FPGAs) are deemed to be a promising computing platform to implement non-iterative hologram generation algorithms. In this paper, we present a cost-optimized heterogeneous FPGA architecture based on a one-step phase retrieval algorithm for CGH generation. The results indicate that our hardware implementation is 2.5× faster than the equivalent software implementation on a personal computer with a high-end multi-core CPU. Trade-offs between cost and performance are demonstrated, and we show that the proposed heterogeneous architecture can be used in a compact display system that is cost and size optimized

Improving performance of single-pass real-time holographic projection

© 2019 Elsevier B.V. This work describes a novel approach to time-multiplexed holographic projection on binary phase devices. Unlike other time-multiplexed algorithms where each frame is the inverse transform of independently modified target images, Single-Transform Time-Multiplexed (STTM) hologram generation produces multiple sub-frames from a single inverse transform. Uniformly spacing complex rotations on the diffraction field then allows the emulation of devices containing 2N modulation levels on binary devices by using N sub-frames. In comparison to One-Step Phase Retrieval (OSPR), STTM produces lower mean squared error for up to N=5 than the equivalent number of OSPR sub-frames with a generation time of [Formula presented] of the equivalent OSPR frame. A mathematical justification of the STTM approach is presented and a hybrid approach is introduced allowing STTM to be used in conjunction with OSPR in order to combine performance benefits.Engineering and Physical Sciences Research Council (EP/L016567/1 and EP/L015455/1

Wide-field phase imaging for the endoscopic detection of dysplasia and early-stage esophageal cancer

© 2018 SPIE. Esophageal cancer has a 5-year survival rate below 20%, but can be curatively resected if it is detected early. At present, poor contrast for early lesions in white light imaging leads to a high miss rate in standard-of-care endoscopic surveillance. Early lesions in the esophagus, referred to as dysplasia, are characterized by an abundance of abnormal cells with enlarged nuclei. This tissue has a different refractive index profile to healthy tissue, which results in different light scattering properties and provides a source of endogenous contrast that can be exploited for advanced endoscopic imaging. For example, point measurements of such contrast can be made with scattering spectroscopy, while optical coherence tomography generates volumetric data. However, both require specialist interpretation for diagnostic decision making. We propose combining wide-field phase imaging with existing white light endoscopy in order to provide enhanced contrast for dysplasia and early-stage cancer in an image format that is familiar to endoscopists. Wide-field phase imaging in endoscopy can be achieved using coherent illumination combined with phase retrieval algorithms. Here, we present the design and simulation of a benchtop phase imaging system that is compatible with capsule endoscopy. We have undertaken preliminary optical modelling of the phase imaging setup, including aberration correction simulations and an investigation into distinguishing between different tissue phantom scattering coefficients. As our approach is based on phase retrieval rather than interferometry, it is feasible to realize a device with low-cost components for future clinical implementation